Phone models compatible with CP5
More
iPhone: All models
Huawei: Mate, Pura, Nova, Pocket
Xiaomi: MIX, Flagship series, CIVI
OPPO: Find N, Find X, Reno, OnePlus Ace
VIVO: X, S, Y, IQOO
Note: Currently not compatible with Google Pixel
Battery life
More
At maximum brightness, the usage time is approximately 2 hours. At the default brightness of 50%, it lasts about 3.5 hours. At the lowest brightness indoors, it can exceed 4 hours.
Bluetooth remote shooting with phone
More
Mode A: Connect the phone to the product's built-in Bluetooth module for control, with an effective operating range of 10-15 meters. Make sure to enable Bluetooth in the CP5 settings page.
Mode B: Connect the phone to the Bluetooth remote control included in the package, with an effective operating range of 10-25 meters.
Note: Only one mode can be selected at a time.
This product does not support hot swapping of TF card
More
This product does not support hot swapping of the TF card. Inserting or removing the TF card while the device is powered on may result in file corruption or other system anomalies.
Long reconnection time after disconnection
More
A. This product uses dual-band Wi-Fi for signal transmission. The phone must disconnect from both the Wi-Fi and screen mirroring before a second connection can be established.
B. If you experience issues with reconnection, please try connecting again.
When using this product, questions regarding abnormal status while recording high-resolution videos on the phone.
More
A. Due to hardware limitations, screen mirroring on the iPhone may stutter during 4K recording.
B. Android phones do not experience stuttering during screen mirroring while recording in 4K or 8K.
Questions regarding inability to display full-screen images in iPhone gallery
More
Due to differences in resolution during transmission, landscape photos can be displayed in full screen, while portrait photos cannot. You can rotate portrait photos to landscape mode in the gallery for full-screen display.
Troubleshooting and solutions for disconnection issues
More
A. If the iPhone is in standby for more than 5 minutes after locking the screen, the default settings will automatically disconnect. You can change the auto-lock time in Settings > Display & Brightness > Auto-Lock.
B. Check if the phone is connected to the product's Wi-Fi hotspot (the device Wi-Fi SSID starts with CP5).
C. Verify the screen mirroring status to ensure it is successfully connected.
Questions regarding abnormal pause during recording
More
A. When the phone switches between landscape and portrait modes, the resolution change may cause the recording function of this product to pause. You will need to click the record button again to resume.
B. Recording in either landscape or portrait mode without switching does not result in any issues.
Questions regarding abnormal status when formatting the TF Card
More
If you encounter an abnormal status when formatting the TF card, please try formatting the card again.
2C, Floor 2, Building 6, Longbi Industrial Park, No. 27 Dafa Road, Bantian Street, Longgang District, Shenzhen